Stainless Steel 347/347H Sheets & Plates Manufacturers in Oman | Suppliers | Stockists | Exporters

Stainless Steel 347/347H Sheets & Plates in Oman

Stainless Steel 347/347H Sheets & Plates, Stainless Steel 347/347H Sheets & Plates Manufacturers, Stainless Steel 347/347H Sheets & Plates Suppliers, Stainless Steel 347/347H Sheets & Plates Stockists, Stainless Steel 347/347H Sheets & Plates Exporters

Stainless Steel 347/347H Sheets & Plates Manufacturers In Oman, Stainless Steel 347/347H Sheets & Plates Suppliers In Oman, Stainless Steel 347/347H Sheets & Plates Stockists In Oman, Stainless Steel 347/347H Sheets & Plates Exporters In Oman

Stainless Steel 347/347H Sheets & Plates

347H Stainless Steel Sheets can be welded by resistance and fusion methods. It's forging, upsetting, and other hot work processes can be performed at 1149 - 1232°C. 347 Stainless Steel Plates are a little better corrosion resistance against 321 Stainless Steel Plates in a strongly oxidizing environment. It is stabilized with columbium and due to its good resistance to intergranular attack, it is preferable for aqueous and low-temperature environments. There are different sizes, dimensions, thicknesses, and shapes.

SA240 347H Foil is a little tougher than sa240 347/347H foil. Its hardenability can be minimized by constant positive feeds and slow speeds. SA240 Type 347 perforated sheet is made through the method of "die and punches" perforating. A sheet with needles is continuously pressed onto the passing sheet which punches holes into the sheet. From the punching, the remaining pieces are sheared off and the surface gets smoothed. AISI 347 has high-temperature oxidation resistance is similar to that of 347/347H plates.

It has good resistance to polythionic acid stress corrosion cracking, encountered in oil refineries. 347h stainless steel sheets can be welded by resistance and fusion methods. Its forging, upsetting, and other hot work processes can be performed at 1149 - 1232°C.

All Chhajed products are manufactured under strict process control and monitored throughout the production process. They go through several checks to ensure that the product delivered is of finest quality

Specification Schedule of Stainless Steel 347/347H Sheets & Plates

SS ASTM Standard Specification ASTM A240 / ASME SA240
International Standard
  • ASTM A 480
  • ASTM A 959
  • ASME IID
  • EN ISO 9445
  • EN ISO 18286
  • EN 10051
  • EN 10088-1
  • ISO 15510
Size Range
  • Cold rolled ASME SA240 Stainless Steel Sheet 0.5-6.4 mm
  • Hot rolled ASME SA240 Stainless Steel Sheet 3.0–10.0 mm
Thickness 0.1 to 100 mm Thk
Width 10-2500mm
Length 2m, 2.44m, 3m, or as required
Finish 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc.
Hardness Half Hard, Soft, Hard, Quarter Hard, Spring Hard
Form Sheet, Plate, Strip, Flats, Clad Plate, Coils, Foils, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, Rolling Plate, Rolls, Blank (Circle), soft annealed, descaled, tread plate, sheared, annealed, Checker Plate manufacturer and Supplier

Chemical Properties of Stainless Steel 347/347H Sheets & Plates


SS 347H
Ni 9 – 13
Cr 17 – 19
C 0.04 – 0.10
Mo 3 – 4
Fe Balance
Mn 2 max
Si 0.75 max
S 0.03 max
P 0.045 max
Co + Ta 8xC min 
1.00 max

Mechanical Properties of Stainless Steel 347/347H Sheets & Plates

Density 8.0 g/cm3
Melting Point 1454 °C (2650 °F)
Tensile Strength Psi – 75000 , MPa – 515
Yield Strength (0.2%Offset) Psi – 30000 , MPa – 205
Elongation 35 %

Equivalent Standard of Stainless Steel 347/347H Sheets & Plates

Stainless Steel SS 347H
AISI 347 347H
UNS S34700 S34709
Werkstoff Nr. 1.4550 1.4961

Basic Type of Stainless Steel Sheets & Plates

Stainless Steel Sheets & Plates

Cold Roll AISI 347/347H Mirror finishing SS Sheet

Stainless Steel Sheets & Plates

4x8 Stainless Steel 347/347H Sheet

Stainless Steel Sheets & Plates

10mm Thick Stainless Steel 347/347H Plate

Stainless Steel Sheets & Plates

0.35mm Cold Rolled BA Mirror Secondary Stainless Steel 347/347H coil

Stainless Steel Sheets & Plates

Cold Rolled SS 347/347H 1.0mm thick plate

Stainless Steel Sheets & Plates

347/347H NO.8 Mirror Stainless Steel Sheet

Stainless Steel Sheets & Plates

347/347H Hot Rolled Stainless Steel Plate

Stainless Steel Sheets & Plates

347/347H 0.8mm Double Color Mirror Stamped Finish SS Sheets

Stainless Steel Sheets & Plates

3mm Thick Stainless Steel 347/347H Sheet

Stainless Steel Sheets & Plates

347/347H Mirror 2B finish 0.6mm 0.5mm SS Sheet

Stainless Steel Sheets & Plates

Hot Rolled 2B Finish 6mm Grade Stainless Steel 347/347H Sheet

Stainless Steel Sheets & Plates

4mm Cold Rolled Stainless Steel 347/347H Sheet

Domestic Area

Mumbai Ahmedabad Bhopal Bikaner Pune
Delhi Chennai Visakhapatnam Mangalore Nagpur
Bangalore Kolkata Siliguri Assam Indore
Hyderabad Surat Nashik Cochin Thane
Faridabad Rajkot Aurangabad Bhavnagar Ranchi
Mysore Coimbatore Tirupur Salem Bikaner
Bhubaneswar Raipur Ankleshwar Bhilai Bhiwandi
Vadodra Kochi

People Also Search For

Stainless Steel 347/347H Sheets & Plates, Stainless Steel 347/347H Sheets & Plates Manufacturers, Stainless Steel 347/347H Sheets & Plates Suppliers, Stainless Steel 347/347H Sheets & Plates Stockists, Stainless Steel 347/347H Sheets & Plates Exporters, Stainless Steel 347/347H Sheets & Plates Manufacturers In Oman, Stainless Steel 347/347H Sheets & Plates Suppliers In Oman, Stainless Steel 347/347H Sheets & Plates Stockists In Oman, Stainless Steel 347/347H Sheets & Plates Exporters In Oman.