Stainless Steel F347/F347H Flanges, Stainless Steel F347/F347H Flanges Manufacturers, Stainless Steel F347/F347H Flanges Suppliers, Stainless Steel F347/F347H Flanges Stockists, Stainless Steel F347/F347H Flanges Exporters
Stainless Steel F347/F347H Flanges Manufacturers In India, Stainless Steel F347/F347H Flanges Suppliers In India, Stainless Steel F347/F347H Flanges Stockists In India, Stainless Steel F347/F347H Flanges Exporters In India
Stainless Steel F347/F347H Flanges
Stainless Steel F347/F347H Flanges Manufacturers in Mumbai, Stainless Steel F347/F347H Flanges Suppliers in Mumbai, Stainless Steel F347/F347H Flanges Stockists in Mumbai, Stainless Steel F347/F347H Flanges Exporters in Mumbai
ASTM A182 Gr F347h is valuable for applications like synthetic handling, drug creation, food preparing, petrol refining and can be limited by the utilization of consistent positive feeds and slow velocities. And so forth Disturbing, manufacturing, and other hot work cycles of Material A182 F347h can be performed at 1149 to 1232°C. SA 182 F347h very well may be strengthened at temperature going from 1010 to 1193°C, can be promptly blanked, stepped, turned and drawn as it is very malleable and extreme.
It very well may be strengthened at temperature going from 1010 to 1193°C. It is lethargic to warm treatment. The hardness and strength of it very well may be expanded by chilly working. Tempered Steel 347 Blind Flange doesn't have an exhausted or a center point place. It has a face thickness of a spine, a coordinating with face type, and comparable catapulting design. It tends to be utilized on a constrain vessel to seal a spout opening.
ASTM A182 F347 Flanges is a columbium balanced out austenitic hardened steel flange with great general consumption opposition and gives better obstruction in solid oxidizing. They give astounding intergranular erosion opposition after openness to temperatures in the chromium carbide precipitation scope of 800 – 1500°F. Normally it is machined from a producing and is ordinarily butt welded to a line.
The edge has a progression of bored openings that permits the rib to be appended to one more rib with bolts. ASTM A182 Gr F347 Slip on Flanges useful in cooling water lines, low-pressure compressed air lines, firefighting water lines, process lines for substances such as oil, gas, steam, condensates. It consist of two-part flange which consist of a Lap Joint Stub End which is butt welded to the pipe and a backing lap joint flange which is slid onto the pipe before welding the Stub End.
All Chhajed products are manufactured under strict process control and monitored throughout the production process. They go through several checks to ensure that the product delivered is of finest quality!
Specification Schedule of Stainless Steel F347/F347H Flanges
| Standard Specifications |
ASTM A182 / A240 & ASME SA182 / SA240 |
| Dimensions |
ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
| Standard |
- BS (British Standard)
- BS1560-3.1
- API 7S-15
- ASA/ANSI/ASME B16.5/16.36/16.47A/16.47B
- B16.47 Series A & B
- B16.48
- API 605
- BS4504
- BS 10
- DIN, EN (European)
- EN-1092
- GOST Flange
- MSS S44
- ISO 70051
- JIS B2220
- API 7S-43
- EN 1092
|
| Size / Range |
1/2 inch (15 NB) - 48 inch (1200NB) DN10~DN5000 or special sizes |
| Connect Type/ Flange Face Type |
Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove Manufacturer and Supplier |
| Pressure Rating ANSI |
Class 150, 300, 600, 900, 1500, 2500 |
| Pressure Calculation in DIN |
6Bar 10, 16, 25, 40 and PN6 PN10 PN16 PN25 PN40, PN64 |
| JIS |
5K, 10, 16 20, 30, 40, 63 |
| UNI |
6Bar, 10, 16, 25, 40 |
| EN |
6Bar, 10, 16, 25, 40 |
| Most common types of |
Threaded, Screwed, Plate, Forged |
| Manufacturer Test Certificates |
EN 10204 3.1B
Third Party Inspection Report
100% Radiography Test Report
Raw Materials Certificate |
| Production technique |
- Forged, Heat treated and machined
|
| Special design |
As per your drawing
AS, ANSI, BS, DIN and JIS
15 NB (1/2 In) - 200 NB (8 In)
Equal and Reducing Configurations
|
| Origin |
Indian, West Europe, Korean USA, Japan, |
| Uses & application |
- Power generation
- Oil refinery industry
- Petrochemical
- Petrochemical industry
|
| Pipe Marking |
All SS 304 Flanges are marked as follows: Supplier or Manufacturer's Name, NPS, Flange Class, ASME B16.5, Material Specification, Trade mark |
| Flange manufactured as per |
- American standard (ANSI)
- German (DIN)
- AS 2129: Table D; E; H
- B.S: BS3293, BS4504 , BS1560, BS10
- ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
- ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
- ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
- British standard (BS)
- DIN: 2631, 2527, 2638, 2641, 2642, 2656, 2627, 2635, 2632, 2566, 2573, 2576, 2633, 2634, 2628, 2655, 2629, 2637, 2636
- The other standard: AWWA C207; KS B1503, EN1092-1, GOST12820, JIS B2220; SABS1123; NFE29203; UNI2276
|
Chemical Properties of Stainless Steel F347/F347H Flanges
|
SS 347H |
| Ni |
9 – 13 |
| Cr |
17 – 19 |
| C |
0.04 – 0.10 |
| Mo |
3 – 4 |
| Fe |
Balance |
| Mn |
2 max |
| Si |
0.75 max |
| S |
0.03 max |
| P |
0.045 max |
| Co + Ta |
8xC min
1.00 max |
Mechanical Properties of Stainless Steel F347/F347H Flanges
| Density |
8.0 g/cm3 |
| Melting Point |
1454 °C (2650 °F) |
| Tensile Strength |
Psi – 75000 , MPa – 515 |
| Yield Strength (0.2%Offset) |
Psi – 30000 , MPa – 205 |
| Elongation |
35 % |
Equivalent Standard of Stainless Steel F347/F347H Flanges
| Stainless Steel SS 347H |
| AISI |
347 |
347H |
| UNS |
S34700 |
S34709 |
| Werkstoff Nr. |
1.4550 |
1.4961 |
Basic Type of Stainless Steel Flanges
ASTM A182 F347/F347H SS Flanges
AISI F347/F347H SS Flanges
ANSI F347/F347H SS RTJ Flanges
ASME B16.5 SS F347/F347H Flanges
F347/F347H SS Header Flanges
ANSI B16.5 SS F347/F347H Forged Pipe Flanges
DN15 F347/F347H SS Flat Welding Flange
ASME B16.5 SS F347/F347H Threaded Flanges
F347/F347H SS KF Blank Flanges
F347/F347H SS Pipe Flanges
F347/F347H SS Threaded Flanges
F347/F347H SS Blind Flanges
Domestic Area
| Mumbai |
Ahmedabad |
Bhopal |
Bikaner |
Pune |
| Delhi |
Chennai |
Visakhapatnam |
Mangalore |
Nagpur |
| Bangalore |
Kolkata |
Siliguri |
Assam |
Indore |
| Hyderabad |
Surat |
Nashik |
Cochin |
Thane |
| Faridabad |
Rajkot |
Aurangabad |
Bhavnagar |
Ranchi |
| Mysore |
Coimbatore |
Tirupur |
Salem |
Bikaner |
| Bhubaneswar |
Raipur |
Ankleshwar |
Bhilai |
Bhiwandi |
| Vadodra |
Kochi |
People Also Search For
Stainless Steel F347/F347H Flanges, Stainless Steel F347/F347H Blind Flanges Manufacturers, Stainless Steel F347/F347H Weld Neck Flanges Suppliers, Stainless Steel F347/F347H Slip On Flanges Exporters, Stainless Steel F347/F347H High Hub Blind Flange Stockists, Stainless Steel F347/F347H Orifice Flanges in India, Stainless Steel F347/F347H Pipe Flanges Manufacturers in India, Stainless Steel F347/F347H Reduced Flanges Suppliers in India, Stainless Steel F347/F347H Slip On Flanges Exporters in India, Stainless Steel F347/F347H Lap Joint Flanges Stockists in India, Stainless Steel F347/F347H Spectacle Blind Flanges in Mumbai, Stainless Steel F347/F347H Lap Joint Flanges Manufacturers in Mumbai, Stainless Steel F347/F347H Swivel Ring Flanges Suppliers in Mumbai, Stainless Steel F347/F347H Slip On Flanges Exporters, in Mumbai, Stainless Steel F347/F347H Screwed Flange Stockists in Mumbai.
